Adding Volicon Media Intelligence service servers to your network

Assign each server a static IPv4 address. If you are using the internet for your connections, place firewalls between your Volicon Media Intelligence service probe servers and their internet connection and between the central server and its internet connection. As a minimum, assign a DNS entry to the central server to facilitate client access.

IP port utilization

Numerous TCP/UDP ports are used for intra-application communication and to provide Volicon Media Intelligence service client access.

Figure: System intercommunication

Table: Port utilization

Probe
Service	Incoming	Outgoing	Protocol
Listener service	8220		HTTP (TCP)
Mediahub	8080		HTTP (TCP)
Volicon Live Streamer port	4505		TCP
Volicon Streamer port	4504		TCP
Mediahub	8080	8080	TCP
Mediahub	8081	8081	TCP
MSMQ		1801	UDP
CEM	88	88	TCP
Central server
Service	Incoming	Outgoing	Protocol
Access to probe’s listener service		8220	HTTP (TCP)
Web server port (if using SSL)		8080	HTTP (TCP)
MSMQ	1801, 3527		UDP
SNTP		25	TCP
Volicon Live Streamer port		4505	TCP
Volicon Streamer port		4504	TCP
Mediahub	8080	8080	TCP
Mediahub	8081	8081	TCP
WebSocket	9090	9090	TCP
CEM port	8300	8300	TCP
HTTP	80	80	TCP
CEM port	88	88	TCP
Client
Service	Incoming	Outgoing	Protocol
Access to Streamer		4504	TCP
Access to Live Streamer		4505	TCP
Mediahub	8080	8080	TCP
Mediahub	8081	8081	TCP
SNTP	25		TCP
WebSocket	9090	9090	TCP
HTTP	80	80	TCP
CEM	88	88	TCP
Content export module
Service	Incoming	Outgoing	Protocol
Volicon Live Streamer port		4505	TCP
Volicon Streamer port		4504	TCP
Mediahub	8080	8080	TCP
Mediahub	8081	8081	TCP
CEM port	8300	8300	TCP
CEM port	88	88	TCP

Network bandwidth

Provide sufficient bandwidth between the server and the monitoring facility. Size the bandwidth to be 1.2-1.5 times the sum of the viewed stream’s bandwidth, with a minimum connection speed of 10 Mbps.