DekTec¶
Volicon Media Intelligence service supports multiple DekTec cards. Driver is common to all cards – DekTec DTA-xxxx cards ver 4.10.0.144 (dated 10/29/2014).
DekTec DTA-2111¶
Multiprotocol modulator supports 8VSB/DVB-C/DVB- T/QAM-B/QAM-C. The card is used to drive RF monitors.
Figure: DekTec DTA-2111 digital modulator¶
DekTec DTA-2136¶
The DekTec DTA-2136 has a dual-channel DVB-C receiver. The card includes an ASI output port for each channel for local monitoring.
Figure: DekTec DTA-2136¶
DekTec DTA-2137C¶
The DekTec DTA-2137C is a dual-channel satellite receiver card. Each input has a corresponding output for local monitoring.
Figure: DekTec DTA-2137C1¶
DekTec DTA-2145¶
The DekTec DTA-2145 has an input and output port configurable as ASI or SDI.
Figure: DekTec DTA-2145¶
DekTec DTA-2160¶
The DekTec DTA-2160 has connector ports for 1- Gig E and 3-ASI interfaces:
Physical location from top |
Port type |
Logical port number |
1 |
Gig E |
Port 4 |
2 |
ASI 1 |
Port 1 |
3 |
ASI 2 |
Port 2 |
4 |
ASI 3 |
Port 3 |
The top connector is the Gig E connector – called port 4 – followed by the ASI port 1, ASI port 2 and ASI port 3 interfaces.
Gig E Port 4 |
|
|
ASI 1 Port 1 |
||
ASI 2 Port 2 |
||
ASI 3 Port 3 |
||