Dektec¶
MIP supports multiple Dektec cards: Driver is common to all cards: Dektec DTA-xxxx cards ver 4.10.0.144 (dated 10/29/2014).
DTA-2136¶
The DTA-2136 has a 2-channel DVB-C receiver. The card includes an ASI output port for each channel for local monitoring.
Figure: Dektec DTA-2136¶
DTA-2137C¶
The DTA-2137 is a 2-channel satellite receiver card. Each input has a corresponding output for local monitoring.
Figure: DTA-2137C1¶
DTA-2138B¶
The 2138B has a single channel DVB terrestrial receiver.
Figure: DTA-2138B Terrestrial Receiver¶
DTA-2144B¶
The DTA-2144B has 4 software programmable ports. Each port may be configured as an input or output and ADI or SD-SDI mode.
Figure: DTA-2144B¶
DTA-2145¶
The DTA-2145 has input and output port configurable as ASI or SDI.
Figure: DTA-2145¶
Dektec DTA-2160¶
The Dektec DTA-2160 has connector ports for 1- Gig E and 3-ASI interfaces:
Physical location from top |
Port type |
Logical port number |
1 |
Gig E |
Port 4 |
2 |
ASI 1 |
Port 1 |
3 |
ASI 2 |
Port 2 |
4 |
ASI 3 |
Port 3 |
The top connector is the Gig E connector, called port 4, followed by the ASI port 1; ASI port 2 and ASI port 3 interfaces.
Gig E Port 4 |
|
|
ASI 1 Port 1 |
||
ASI 2 Port 2 |
||
ASI 3 Port 3 |
||