MIB variables table¶
Alert Variable Names (in MIB) |
OID Strings |
Description |
volEncoder |
PREFIX = 1.3.6.1.4.1.23 522.1 |
Probe Server Name OID type and prefix for OIDs below |
volEncoderName Octet String |
PREFIX.2 |
Name of encoder which detected the alert. (Names) configured during installation and usually not changed by the user |
volEncoderHostname Octet String |
PREFIX.3 |
Probe server Hostname, IP or DNS name. The Hostnames should be unique within servers on the NMS monitored network |
volAlertClipID Integer |
PREFIX.11.1 |
Generated with each new event (e.g., media defect) to identify it |
volAlertDescription Octet String |
PREFIX.11.2 |
Textual description of the alert |
volAlertClipRef Octet String |
PREFIX.11.3 |
Alert clip ID and URL for its location on the web server e.g., |
volStreamName Octet String |
PREFIX.11.4 |
Stream/scanner name to help identifying the link/STB location |
volAlertEnum Integer |
PREFIX.11.5 |
Grouping: event(0), test(10), service(20), encoder(30), storage(40), license(50), AFD fault(100), video(200), metadata(300), power(400), Video Lost(500) |
volAlertName Octet String |
PREFIX.11.6 |
E.g., AUDIOLOW, ENCODER STOPPED |
volAlertType Integer |
PREFIX.11.7 |
Signals the NMS SET(1) or CLEAR(0) alert states, e.g. alert is SET |
volCertainty Integer |
PREFIX.11.8 |
Degree of alert type percentage, e.g., 96 percent of Black Screen |
volAudioLevel Integer |
PREFIX.11.9 |
Integer value of audio Level in dB |
volAudioPin Integer32 |
PREFIX.11.10 |
Audio Pin number, it is audio language pin. For now single language is used, the Pin is always 0 |
volEventTime Octet String |
PREFIX.11.11 |
Time when the alert has occurred, e.g. 2010-10-31 20:57:21 |
rpmChannelID Octet String |
PREFIX.11.12 |
Channel Number in the Lineup. It is stored in a string, such as “124” |
rpmChannelName Octet String |
PREFIX.11.13 |
Lineup Channel/Service name such as Fox… |
rpmChannelQAM Octet String |
PREFIX.11.14 |
Channel group name for any group of channels logically related |
volAlertSeverity Integer32 |
PREFIX.11.15 |
Designates priority for a corresponding problem to get resolved: info(1), warning(2), minor(3), major(4), critical(5) |
oidAlertLevel Octet String |
PREFIX.11.16 |
Alert level (category) with one of the following possible values: probe (1), group (2), system (3) |
oidGroup Octet String |
PREFIX.11.17 |
Name of the affected probes’ group |
oidProbe Octet String |
PREFIX.11.18 |
Name of affected probe machine |
VolAlertName, VolAlertEnum, and VolAlertType variables indicate when to set or clear NMS internal alarms. System related traps (other than for media), though not used to set or clear alarms, provide important information about the defect source such as volAudioLevel and volAlertSeverity.